High Power, RGB Indoor
Excellent choice for dynamic environments such as cinemas, retail and hospitality needing higher illumination.
**Use only MLDR-120-24 or MLDR-20-24JB power supplies when controlling RGB LED Strip. Do not use dimmable power supplies for colour change applications.
Product Code | LTP-XX-RGB | |
Electrical | Input Voltage | 24V DC |
Power Consumption | 4.3W/Ft | |
Specs | Colour Temperature | RGB |
Dimmable | Yes | |
Beam Angle | 120° | |
LED | Type | High Brightness 5060 SMD LEDs |
Life Span | 50,000 hours | |
Spacing | 16mm | |
# per foot (304mm) | 18 | |
Design | Dimensions (Inches) | .39″ W |
Dimensions (Milimeters) | 10mm W | |
Max Single Run Length | 20Ft | |
Custom Cuttable | 4″ | |
Approved Location | Indoor | |
Warranty | 6 years | |
Approvals | cETLus |
- HIGH POWER TAPE LIGHT 4.3W/FT INDOOR USE RGB LP-5060-60-24-RGB
- Connector LV-CN-A10-HD Cut Sheet
- 3 CHANNEL CONTROLLER - LT-09S-RF
- SIGNAL AMPLIFIER - LT-390A
- CLEAR U CHANNEL TRACK - VO-C10-8
- POWER FEED CONNECTOR INDOOR RGB - LV-CN-C10
- CORNER SURFACE MOUNTED ALUMINUM EXTRUSION - LV-LB-V3-FR
- Extrusion LV-RD54-2M Cut Sheet
- Extrusion LV-RD55-2M Cut Sheet
- Extrusion LV-1401 Cut Sheet
- Extrusion LV-ALP007 Cut Sheet
- Extrusion LV-ALP2208 Cut Sheet
- Extrusion LV-ALP2908 Cut Sheet
- Extrusion LV-RD54-1M Cut Sheet
- Extrusion LV-RD55-1M Cut Sheet
LV-CN-C10
RGB POWER FEED CONNECTOR INDOOR
LV-CN-D10
IN-LINE CONNECTOR FOR RGB INDOOR
LV-CN-O10 / LV-CN-O10-2
IN-LINE CONNECTOR RGB INDOOR 6", 2"
VO-C10-8
1/2" U CHANNEL TRACK
LV-FS-MC-004
MOUNTING CLIPS
LV-ALP007-MC
MOUNTING CLIPS
LV-ALP2208-MC
MOUNTING CLIPS
LV-W1/W3-MC
MOUNTING CLIPS
LV-FS-EC-001
END CAP
LV-ALP007-EC
END CAP
LV-ALP2208-EC
END CAP
LV-LB-V3-FR
WEDGE ALUMINUM TRACK
LV-1401
EXTRUSION
LV-ALP007
EXTRUSION
LV-ALP2208
EXTRUSION
LV-ALP2908
EXTRUSION
LV-RD54-2M
EXTRUSION
LV-RD55-2M
EXTRUSION
LV-RD54-1M
EXTRUSION
LV-RD55-1M
EXTRUSION
- Aisle and stairway lighting
- Cabinet and cove lighting
- Back lighting
- Showcase lighting
- Linear decorative lighting